A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D3 > D3 - Fuel and Exhausts

D3 - Fuel and Exhausts Everything to do with getting fuel into the engine, and fumes back out again

Reply
 
Thread Tools Display Modes
  #1  
Old 10th February 2021, 05:44 PM
Kazs8 Kazs8 is offline
Junior Member
 
Join Date: Feb 2019
Posts: 27
Default S8 exhaust flexi question

Alright guys
Need some advice Went to local exhaust place powerflow to get quote to remove all four silencers on stock exhaust system noticed the catalyst converter flexi on one side is blowing, garage suggested to just remove both cat flexi parts & have new stainless pipe welded as they canít supply new flexi part in that size
So is it safe to remove the flexi parts replace with straight pipe ? Will it cause any problems at all ? Thanks
Reply With Quote
  #2  
Old 10th February 2021, 07:30 PM
homer simpson's Avatar
homer simpson homer simpson is offline
Senior Member
 
Join Date: Nov 2013
Posts: 958
Default

I'll wait for someone with more knowledge and a better answer than mine, but I would imagine the flexis are there for a reason. I had one of mine blow and VRS did replace it, so they are available.
__________________
2008 (facelift) S8 with B&O, ACC, glass sunroof, reversing camera, front and rear heated seats, ceramic brakes, homelink, electric side and rear blinds, ski load through, heated fan washer jets, remote boot closing, de-flapped manifold, fridge, umbrella holder
Reply With Quote
  #3  
Old 10th February 2021, 07:35 PM
steamship's Avatar
steamship steamship is offline
Senior Member
 
Join Date: Jun 2013
Location: Londonderry, Northern Ireland
Posts: 2,165
Default

Quote:
Originally Posted by homer simpson View Post
but I would imagine the flexis are there for a reason.
Absolutely agree with homer. The reason is in the name. Think how the exhaust will behave if it's effectively joined solidly to the engine at one end and almost five metres in length. I'd suggest checking another exhaust place if possible.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts

My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts

Sold! 2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights

My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds
Reply With Quote
  #4  
Old 10th February 2021, 07:53 PM
MikkiJayne MikkiJayne is offline
Senior Member
 
Join Date: Jan 2012
Location: Devon
Posts: 3,869
Default

Yes exactly ^ Its there for a reason. Just removing it for convenience is not sensible.

Audi exhaust pipework is metric, which befuddles most exhaust shops in the UK since our standard pipework is imperial. For some unfathomable reason, they then defer to the next size down and hack it to fit . Why they don't go up is beyond me. 2 1/4" pipe is 57mm so fits inside the D2 S8's 60mm pipework, but 2 1/2" is 63mm so slips over the top of it nicely and doesn't cause a restriction.

Etka shows that on the D3 the connection after the cats is 60mm so I would expect the flexis in front of it are also 60mm, meaning a 63mm flexi should work just fine and not cause any restrictions.

Curiously enough, the D2 PF 4.2 5-speed and FL S8 actually do have completely solid exhaust systems with no flexis in them, but all the other FL models and the PF 4-speed do have flexis. The S8 has stiffer engine mounts though so obviously the Audi engineers decided that flexis weren't needed in that application but were in the others.
Reply With Quote
  #5  
Old 10th February 2021, 10:28 PM
Kazs8 Kazs8 is offline
Junior Member
 
Join Date: Feb 2019
Posts: 27
Default

I’ll take that on board, just seen few universal ones on eBay will this one in photo be suitable ?


Last edited by Kazs8; 11th February 2021 at 12:45 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:23 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.